D-Link DPR-1061 Specifiche

i D-Link DPR-1061 USB 2.0 MFP Server Manual Rev. 05 (October, 2007)

6 LED Indicators The front panel of the Print Server features five LED indicators:  Power Steady green confirms that the Print Server is powered ON

96 TCP/IP Printing for Windows XP Go to Start Î Printers and Faxes Î Add a Printer. When the following screen shows up, click Next.

97 Select the first option, Local printer attached to this computer, and click Next.

98 Select the second option, Create a new port, and highlight Standard TCP/IP Port from the pull-down menu. Click Next. Type the IP address of the

99

100 Select Custom and click Settings.

101 Then the follow screen will shows up, select LPR from the Protocol field. Then enter the Queue Name, which can be referred from PRINTER STATUS

102

103 Click Next.

104 Click Finish.

105 Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with you

7 Setting up the DPR-1061 Installing the Print Server WARNING: Configuration problems may result if the Print Server is powered up without first estab

106 At this screen, you can input a name for the printer, and then click Next Select Yes to print a test page, click Next.

107 Click Finish. The printer is now ready for printing with Windows XP on your network.

108 TCP/IP Printing for Windows 2000 Go to Start Î Settings Î Printers and Faxes Î Add a Printer. When the following screen shows up, click Next.

109 Select the first option, Local printer attached to this computer, and click Next.

110 Click Next. Select the second option, Create a new port, and highlight Standard TCP/IP Port from the pull-down menu. Click Next.

111 Click Next. Type the IP address of the MFP server (e.g. 10.62.31.15 used in this manual), which can be checked from the PRINTER SERVER STATUS o

112

113 Select Custom and click Settings.

114 Then the follow screen will shows up, select LPR from the Protocol field. Then enter the Queue Name, which can be referred from PRINTER STATUS

115

8 Power ON Self-Test Every DPR-1061 has been factory-tested to operate properly. When the DPR-1061 is powered ON, it also automatically performs a Se

116 Click Next. Click Finish.

117 Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your

118 At this screen, you can input a name for the printer, and then click Next Select the first option, Do not share this printer, and click Next.

119 Select Yes to print a test page, click Next.

120 Click Finish. The printer is now ready for printing with Windows 2000 on your network.

121 TCP/IP Printingfor Windows 98SE/ME Go to Start Î Settings Î Control Panel. Double click on Network, and then click Add.

122 Highlight Client and click Add. At this window, click Have Disk.

123 1. Insert the DPP-1061 CD-ROM into your CD-ROM drive. Select the letter representing the CD-ROM drive on your computer from the pull-down menu. 2

124 You should now be back to the Network Properties Page. Highlight LPR for TCP/IP Printing and click Properties.

125 Click Add Port.

9 LED USB1 USB2 LPT Faulty Component 1 long 8 short LPT Controller error 1 long 9 short LPT error 1 long 14 short LAN MII error 1 long 18 short U

126 Type in the IP address and Port Name of the MFP server, which can be referred from the PRINTER SERVER STATUS and PRINTER STATUS of the MFP server

127

128 The IP Address and Port Name will be displayed in the following screen. (The IP Address and Port Name here are just for example only.) Click OK.

129 Click OK.

130 Windows will ask for a restart. Click Yes. Once your computer has rebooted, click on Start Î Settings Î Printers Î Add Printer. When the Add

131 Select Network Printer and click Next.

132 Type in the path if you know it; otherwise, click Browse.

133 At the following screen, browse for the printer port and highlight the port (e.g. dlink-1D6FA3 in this manual). Click OK.

134 If the network path is not specified, type in the IP Address and Port Name of the MFP server. Select Yes or No to enable or disable printing from

135 Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with you

10 Getting Started Below is a sample network using the DPR-1061. The DPR-1061 has a built- in Web-based management feature that allows users to easily

136 Click Next Select Yes to print a test page. Click Finish.

137 To check whether the printer is installed, go to Start Î Settings Î Printers.

138 Unix/Linux Printing Printing Text Files form Unix Text files on Unix systems contain lines that end with “newline” characters, as opposed to MS-

139 Printing form BSD Unix Versions For “flavors” of the Unix operating system derived from or related to the BSD releases, such as SunOS 4.x, Linux,

140 chown bin.daemon /var/spool/hp5l chmod 775 /var/spool/hp5l 5. Add an entry for the printer to /etc/printcap, similar to the following: hp5l:\ :

141 ◆ sd=dir The location of the printer’s local spool directory. ◆mx#blocks The limit for print job files in the local spool directory; 0 means no

142 Printing from SCO Unix System V/386 To allow printing to a printer attached to your D-LINK network print server from a SCO Unix System V/386 host.

143 7. Answer r (remote printer) to the question Is printer a remote printer or a local printer (r/l)? 8. When prompted with the question: Please en

144 Printing from Solaris To allow printing from a Sun Solaris workstation, 1. Log in as the superuser (root). 2. Add an entry for the print server i

145 Printing from Red Hat Linux Adding a Printer 1. Click the printer icon at the bottom of the desktop. 2. Since no printer is set up so far,

11 Using PS Software This chapter will introduce you the installation and operation of various useful software program – PS Software (contains PS-Link

146 3. Click the OK button in the pop-up dialogue box to open the man Printer configuration tool menu. Note that to use the Printer configuration tool

147 Printer Configuration Tool menu 5. The Add a new print queue menu appears, click Forward to continue.

148 6. Enter a unique name for the printer in the Name text field. The printer name cannot contain spaces and must begin with a letter. The printer n

149 8. Select the printer model.

150 If a printer has not been detected automatically, select the model from the list. You can manually select the name of the printer manufacturer fro

151 10. Print a test page to make sure the printer is functioning properly. To print a test page, select the printer from the printer list, then selec

152 Setting up Printing in Mac OS X Tiger(10.4) NOTE: Mac OS printing is supported by Postscript printers only! With Mac OS X Tiger (10.4), you can u

153 Select the Apple Talk tab in the Network menu. Check to select the Make Apple Talk Active option. Click on the Apply Now button and close the menu

154 Adding a Printer Use the Go menu at the top tool bar and select Applications option and find the Utilities folder or open the Utilities folder dir

155 Mac OS X Tiger (10.4) supports five printing protocols: 1. AppleTalk 2. Bonjour 3. Internet Printing Protocol (IPP) 4. Line Printer Daemon

12 PS Software To avoid the conflict in your network, you can use PS Software to change the related settings of your MFP Server (such as the IP addres

156 Jet Direct – Socket enabled printer, click on the button and follow the instructions to add an IP Printer beginning on “Adding an IP printer” s

157 AppleTalk-enabled or Bonjour-enabled Printers To add an AppleTalk-enabled or Bonjour-enabled printer, click on the button in the Printer Browser

158 Select the printer model from Printer Name list and Connection type in the Printer Browser menu. The printer name selected should be the same as

159 The printer that has just been added will show up in the Printer List menu, it might take a few seconds depending on network conditions. When the

160 Adding an IP Printer To add an Internet Printing Protocol enabled, Line Printer Daemon enabled or HP Jet Direct – Socket enabled printer, click on

161 Type the IP Address of the printer, the name will appear in the Name field when the printer is found. The Printer Browser will indicate that it is

162 For set up LPD Printing: 1. Enter the IP address of the print server to which the printer is attached in Address field. 2. Type the port name

163 For set up IPP Printing: 1. Enter the IP address of the print server to which the printer is attached in Address field. After that, type “: 80” o

164 For set up Socket Printing: 1. Enter the IP address of the print server to which the printer is attached in Address field. After that, type “: 91

165 When the Installable Options pop-up window shows up as below, click Continue button.

13 2. Click Next> button in the welcome window of InstallShield Wizard. 3. Specify the destination location by pressing Browse… button. Othe

166 The printer that has just been added will show up in the Printer List menu, it might take a few seconds depending on network conditions. When the

167 Setting up AppleTalk or LPR Printing in Mac OS X NOTE: Mac OS printing is supported by Postscript printers only! With Mac OSX you can use Apple

168 To print, open a document and select File Î Print from the menu. Select Edit Printer List from the Printer dialog box.

169 Click Add Printer Select the printing protocol preferred, AppleTalk or LPR Printers using IP. In this example, AppleTalk has been selected.

170 AppleTalk protocol: After selecting AppleTalk, the Port Names of the Print Server will be displayed. The Port Names shown here are examples only.

171 LPR Printers using IP protocol: When you select LPR Printers using IP Protocol, this window will appear. Type the IP Address of the Print Serv

172 Setting up AppleTalk Printing in Mac OS 9 NOTE: Mac OS printing is supported by Postscript printers only! The AppleTalk network protocol is use

173 which zone the Print Server should be in. You should locate the Print Server in the same zone as most of the users who will be using it. If your n

174 AppleTalk Enter the AppleTalk Zone name in the box. In the following options, enter the related configuration, such as the printer type. Chooser

175 Printer Type: Enter the printer's type in this box. PostScript Level: Select from the pull-down menu (Level 1 or Level 2). Font Group: Select

14 4. You may enter a new folder name in the Program Folder field if you want to change the default name. Otherwise, you may leave the default setti

176 If you have not previously set this printer as the default, your computer will prompt you for a PostScript Printer Description file. Choose Select

177 Port Pinouts The following table lists the pinouts of the print server’s 25-pin parallel port connector (identical to the connector used on most

178 Technical Specifications Printer Connection Printer Port: USB 2.0 or Parallel Bi-directional Communication: Hewlett-Packard PJL (Printer Job Lan

179 Appendix: DPR-1061 Printer Compatibility List MFP Supported on Windows 2000 SP4 and Windows XP Printer List Results (*Y=Pass, N=Fail, N/A=Non-ava

180 22. Dell Photo 926 Y Y N/A 23. Dell Photo 966 Y Y Y 24. EPSON PM-A970 Y Y N/A 25. EPSON PM-A920 Y Y N/A 26. EPSON PM-A820 Y Y N/A 27.

181 48. HP PSC1315 Y Y N/A 49. HP Photosmart C1350 Y Y N/A 50. HP Photosmart C1610 Y Y N/A 51. HP Photosmart C3180 Y Y N/A 52. HP Photosmart C418

182 MFP Supported on Windows Vista 32-bit Printer List Results (*Y=Pass, N=Fail, N/A=Non-available function)Printer Manufacturer Model Printing Scan

183 24. EPSON PM-A970 Y Y N/A 25. EPSON PM-A920 Y Y N/A 26. EPSON PM-A820 Y Y N/A 27. EPSON PM-A720 Y Y N/A 28. EPSON PM-A950 Y Y N/A 29. EPSON PM-A89

184 50. HP Photosmart C1610 Y Y N/A 51. HP Photosmart C3180 Y Y N/A 52. HP Photosmart C4180 Y Y N/A 53. HP Photosmart C5180 Y Y N/A 54. HP LaserJet 30

15 After installing the program, the application program for the MFP Server is automatically installed to your computer, and creates a folder in Star

ii Contents Package Contents ... iv Contents of Packag

16 Using PS-Link PS-Link, supports for Windows 2000/XP/2003/Vista, is a useful tool for you setting up multi-function (Print/ Scan/ Copy/ Fax) of a MF

17 Server Name: A list displays the name of the connected MFP Server within the network. Discover: You may click this button to manually resea

18 [Setup Wizard] – Setup Wizard is a step-by-step setup interface, which correspond with the Configuration of the Web-based Configuration Utility, a

19 System Settings

20 Change IP Address:

21 Workgroup of Microsoft Network

22 AppleTalk Settings

23 After done the configuration, click Save to restore the current setting or Cancel to abort.

24 [Change IP Address] - Click this button to bring up the following pop-up window, which allows you to change the IP Address of the MFP Server in tw

25 Printer Port: This field not only displays the basic information and current status of the connected printer, but also allows you to do further con

iii HELP ...83 Reboot ...

26 Installing and Using MFP/GDI Printer This section will introduce you how to start the initial installation of various MFP/GDI printer in the use of

27 For HP: 1. When the installation program asks you to connect the USB cable, you are allowed to connect the printer with you computer later by c

28 2. When the installation of all drivers of the MFP/GDI printer CD-ROM on your computer is done, you may use PS-Link to complete the physical conn

29 As long as the connection is linked successfully, a prompt of PS-Link as below will show up to inform you. Press OK to exit. 3. Now the MFP/GDI

30 For EPSON:

31 1. When the installation program asks you to connect the USB cable of the MFP/GDI printer to your computer, you are not allowed to ignore it; there

32 When the connection is completed successfully, a prompt as below will show up to inform you. Press OK to exit. 3. Then you have to go back to

33 For Canon: 1. When the installation program asks you to attach the MFP/GDI printer to your computer, you are not allowed to skip this step; ther

34 2. Launch the PS-Link utility and click the [Link] button.

35 When the connection is completed successfully, a prompt as below will show up to inform you. Press OK to exit. 3. Then you have to go back to

iv Package Contents Contents of Package:  D-Link DPR-1061 USB 2.0 MFP Server  Manual on CD  Printed Quick Installation Guide If any of the above

36 For Lexmark: 1. When the installation program asks you to attach the MFP/GDI printer to your computer, then you have to follow; otherwise, you w

37 2. Launch the PS-Link utility and click the [Link] button.

38 When the connection is completed successfully, a prompt as below will show up to inform you. Press OK to exit. 3. Then you have to go back to f

39 For Samsung:

40 1. When the installation program asks you to connect the printer to your computer, just ignore it and click Next> button to continue. 2.

41 3. After the installation of the MFP/GID CD-ROM is finished, you may start to utilize PS-Link to complete the physical connection between the MFP/

42 For Brother: 1. When the installation program asks you to plug in the USB cable of the MFP/GDI printer to your computer, then you have to foll

43 2. Launch the PS-Link utility and click the [Link] button.

44 When the connection is completed successfully, a prompt as below will show up to inform you. Press OK to exit. 3. Then you have to go back to

45 For Fuji Xerox: 1. Owing to the installation program of Xerox MFP/GDI printer will not request you to do physical connection between the printer

1 Introduction The D-Link DPR-1061 Print Server is an Ethernet/USB print server that connects to your Ethernet, Fast Ethernet or USB network anywhere

46 2. While after the installation is finished, you have to link the connection between the MFP/GDI printer and your computer in order to use the MFP

47 Using PS-Wizard PS-Wizard, supports for Windows 2000/XP/2003/Vista, is a simple and useful tool for you easily adding a printer on your computer in

48 Print Server: This field allows you to manually discover the connected MFP Server and to do further configuration of the MFP Server that is selec

49 LAN: You may also to specify dynamic or static IP address for your MFP Server. Then click Apply button to implement the new setting. Port Inform

50 The wizard provides three ways for you to select printer driver: 1. Show current installed drivers: You may select this option, “Show currentl

51 After done the selection of printer driver, the wizard will ask you to confirm your selection again in the following window. Beside, you are allo

52 When the following window shows up, you may do print test by clicking Print Test Page button to check if you can do printing normally. If yes, th

53 Using the Web Configuration Home To begin managing the DPR-1061, simply launch the browser (e.g. Internet Explorer 6.0 used in this manual) you hav

54 display its submenu and select a desired option listed in the left column, and then the corresponding content will show up in the center column.

55 SETUP > Print Server Setup The Print Server Setup screen allows you to modify the Print Server Name and Port Name, as below shows. D-Link does n

2  Because the DPR-1061’s very portable and inexpensive compared to a PC-based print server, and Print Server connects to your file servers through

56 Print Server Name In this field, you can configure the basic information of MFP server. The basic information contains a name of the print server,

57 SETUP  LAN Setup The LAN Setup screen allows you configure the local network settings of MFP server. Please note that this section is optional and

58 SETUP  Printer Setup The Printer Setup screen allows you install the printer drivers for the printer currently connected to your print server. N

59 The above screen is the Network Printer Wizard so please click RUN, and if a second window appears as below click RUN again.

60 Please select the printer required, then click NEXT to continue.

61 The wizard provides three ways for you to select printer driver: 1. Show current installed drivers: You may select this option, “Show currentl

62 2. Select from manufacturer list: Check this option, “Select from manufacturer list”, to manually select your printer from drop-down menus by bran

63 3. Have Disk: Click Have Disk button to bring up the following window. Insert the manufacture’s installation CD-ROM to install the printer drive

64

65 When the following window shows up, you may do print test by clicking Print Test Page button to check if you can do printing normally. If yes, cli

3 ¾ PS-Link  A useful tool for you supporting multi-functions (Print/ Scan/ Copy/ Fax) of a MFP printer, printing of GDI printer, and even other mu

66 If yes, then click Finish button to exit the installation window and now you may start your printing tasks.

67 ADVANCED > Advanced LAN The Advanced LAN screen allows you to further network setting of MFP server, while you are recommended better not to cha

68 TCP/IP This field contains four options that allow you to configure the TCP/IP setting: DNS Server Address, UPnP, Mac Bonjour/Rendezvous, and Seco

69 ADVANCED > User Access The User Access screen allows you to create and maintain an authorized list of users that are allowed to access the MFP s

70 Authorised Users You can add or delete any user to or from the User List. The User List at the bottom of the screen displays the current defined us

71 ADVANCED > E-Mail Notification The E-Mail Notification screen allows you to assign an E-mail address to the MFP Server, so that your mail of the

72 Enable E-mail Notification You can set the print server to send an alert message when the printer status changes through E-mail. To enable this fu

73 ADVANCED > SNMP The SNMP screen allows you to use SNMP (Simple Network Management Protocol) to manage complex networks. SNMP Management Commun

74 MAINTENANCE > Password The Password screen allows you to change the password of the MFP server by entering the current password in Current Passw

75 MAINTENANCE > Save/Restore Settings The Save/Restore Settings screen not only allows you to save the current configuration in a computer for bac

4 External Features Port Connectors The DPR-1061’s three printer ports are located on its rear panel. Two USB and one parallel ports are labeled USB1,

76 MAINTENANCE > Firmware Upgrade The Firmware Upgrade screen displays you the current firmware’s information of the MFP server, and also allows yo

77 MAINTENANCE > Diagnostics The Diagnostics screen allows you to test the printing for each port of the MFP server: USB1, USB2, and LPT. After don

78 STATUS > Device Info The Device Info screen displays the status of your MFP Server, printer, and network for your reference.

79 Print Server Status This field displays the information of the print server about the firmware version, MAC/IP address, and up time. Printer Sta

80 STATUS > Network The Network screen displays the general Network status of your MFP Server, including: Auto IP This field contains the current

81

82 STATUS >Print Log The Print Log screen displays the printing record of the authorized users. Print Log The items in this field display the use

83 HELP The Help screen provides you brief information about the MFP Server for your reference.

84 Reboot If you want to reset the MFP server, you may just click the Reboot for restarting. Refresh Printer Status Click USB1, USB2, LPT to ref

85 TCP/IP Printing for Windows Vista Go to Start Î Control Panel Î Printers.

5 Rear Panel Connectors Network Cable Connector The Print Server’s rear panel feature an RJ-45 connector for connection to 10Base-T Ethernet cabli

86 Click Add a printer. Select the first option, Add a local printer, and then click Next.

87 Select the second option, Create a new port, and highlight Standard TCP/IP Port from the pull-down menu. Click Next. Type the IP address of the

88

89 Select Custom and click Settings.

90 Then the follow screen will shows up, select LPR from the Protocol field. Then enter the Queue Name, which can be referred from PRINTER STATUS o

91

92 Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your

93 Click Next.

94 After clicked Print a test page, a small dialogue box will show up as below. Click Close.

95 Click Finish. The printer is now ready for printing with Windows Vista on your network.